Intel BLKDP43BF-10PACK ユーザーズマニュアル
Product Description
27
1.11 Hardware Management Subsystem
The hardware management features enable the board to be compatible with the Wired
for Management (WfM) specification. The board has several hardware management
features, including the following:
• Fan monitoring and control
• Thermal and voltage monitoring
• Chassis intrusion detection
for Management (WfM) specification. The board has several hardware management
features, including the following:
• Fan monitoring and control
• Thermal and voltage monitoring
• Chassis intrusion detection
1.11.1
Hardware Monitoring and Fan Control
The features of the hardware monitoring and fan control include:
• Fan speed control controllers and sensors integrated into the Intel ICH10R
• Remote thermal diode sensor for ambient temperature sensing
• Thermal sensors in the processor, Intel 82P43 MCH, and Intel 82801JIR (Intel
• Fan speed control controllers and sensors integrated into the Intel ICH10R
• Remote thermal diode sensor for ambient temperature sensing
• Thermal sensors in the processor, Intel 82P43 MCH, and Intel 82801JIR (Intel
ICH10R)
• Power supply monitoring of five voltages (+5 V, +12 V, +3.3 V, +1.125 V, and
+VCCP) to detect levels above or below acceptable values
• Thermally monitored closed-loop fan control, for all three fans, that can adjust the
fan speed according to thermal conditions
1.11.2
Fan Monitoring
Fan monitoring can be implemented using Intel
®
Desktop Utilities or third-party
software.
For information about
Refer to
The functions of the fan headers
1.11.3
Chassis Intrusion Detection
The board supports a chassis security feature that detects if the chassis cover is
removed. The security feature uses a mechanical switch on the chassis that attaches
to the chassis intrusion header. When the chassis cover is removed, the mechanical
switch is in the closed position.
removed. The security feature uses a mechanical switch on the chassis that attaches
to the chassis intrusion header. When the chassis cover is removed, the mechanical
switch is in the closed position.
For information about
Refer to
The location of the chassis intrusion header