Intel BLKDP43BF-10PACK ユーザーズマニュアル
Product Description
31
1.12.1.2 Wake-up Devices and Events
Table 8 lists the devices or specific events that can wake the computer from specific
states.
states.
Table 8. Wake-up Devices and Events
These devices/events can wake up the computer…
…from this state
LAN
S1, S3, S4, S5
PME# signal
S1, S3, S4, S5
Power switch
S1, S3, S4, S5
RTC alarm
S1, S3, S4, S5
Serial port
S1, S3
USB
S1, S3
WAKE# signal
S1, S3, S4, S5
PS/2 port
S1, S3, S4, S5
Notes:
• S4 implies operating system support only.
• USB ports are turned off during S4/S5 states.
• The PCI Express WAKE# signal is controlled by the enable/disable option in the BIOS.
• USB ports are turned off during S4/S5 states.
• The PCI Express WAKE# signal is controlled by the enable/disable option in the BIOS.
NOTE
The use of these wake-up events from an ACPI state requires an operating system
that provides full ACPI support. In addition, software, drivers, and peripherals must
fully support ACPI wake events.
that provides full ACPI support. In addition, software, drivers, and peripherals must
fully support ACPI wake events.