Alamo none ユーザーズマニュアル

GRASS KING   03/09

Operation Section 4-36

© 2009 Alamo Group Inc.

Before disconnecting the mower, the PTO must be disengaged and all motion at a complete stop. Move the
mower to a level storage location and lower both wings to the ground. If the mower will be stored with the
sections in the raised position, be sure that the locks are engaged. If the mower is not resting securely on the
ground, block the mower up securely before attempting to disconnect it from the tractor. Use extreme care to
keep feet and hands from under the mower and clear of any pinch points.

Always shut the Tractor completely down, place the transmission in park, and set the
parking brake before you or anyone else attempts to connect or disconnect the Implement
and Tractor hitches. 

 (S3PT-15)

To disconnect the rear mower, first extend the
tractor 3-point hitch top link to remove tension on
the top link hitch pin.  When the pin is loose and
easy to rotate, remove the pin from the mower.
Next remove both lower hitch pins. OPS-F-0055

After disconnecting the 3 lift points, remove the
mower driveline from the tractor PTO shaft.  Lay
the driveline down carefully to avoid damaging the
driveline or its shield.  Do not let the driveline fall
into mud or dirt, which can contaminate the
bearing and shorten the life of the driveline.