Land Pride DH3510 プリント
18
Disc Harrows
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
DH35 Series
Description
DH3510
DH3512
Drawbar Horsepower Requirement
45-75 hp
55-80 hp
Side Mainframe Construction
3" x 4" x 3/16" Wall tubing w/gusset
reinforcements
3" x 4" x 3/16" Wall tubing w/gusset
reinforcements
Max. Cultivation Width
10’- 6" Approx.
12’-0" Approx.
Transport Width
10’ -10" Base Unit
12’-4" Base Unit
Number of Bearings
12 for all Ten Foot Disc Configurations
12 for 9" Disc Spacing
16 for 7.5" Disc Spacing
Approx Weight Per Blade
with 7.5" Spacing
with 7.5" Spacing
79 to 84 lbs
76 to 82 lbs
Approx Weight Per Blade
with 9" Spacing
with 9" Spacing
87 to 93 lbs
81 to 86 lbs
Hitch Type
Pull-type w/clevis & hole for 1 1/4" pin
Hitch Frame Construction
3"x 3" x 1/4" Wall tubing w/hose carrier and jack mount
Center Gang Beam Construction
4"x 3" x 1/4" Wall tubing
Gang Swing Arm
4"x 3" x 1/4" Wall tubing
Main Frame Front Tube
5"x 3" x 1/4" Wall tubing
Mainframe Width
93"
Disc Size Selections
20" or 22" Notched or Smooth
Gang Axle Construction
1 1/8" Square Hi-strength Steel
Disc Bearings
Greaseable & Triple Sealed Ball Bearings
Disc Spacing Choices
7.5" or 9"
Forward Gang Angle Adjustment
Single Pin Adjustment to 15, 16 1/2, 18, 19 1/2 or 21 degrees
Rear Gang Angle Adjustment
Single Pin Adjustment to 12, 13 1/2, 15, 16 1/2 or 18 degrees
Front to Rear Leveling System
Manual crank
adjustment
Depth Control
Cylinder
stroke control spacers
Hydraulic Cylinder
for Depth/Lift Control
for Depth/Lift Control
3"x 8" Cylinder with hoses and fittings
Transport Tires & Rims
Two 9.5L x 15 Tires Mounted on 15" x 6" 5-bolt Rims
20" Rear Furrow Filler Pair
Optional
18" Rear Furrow Filler Pair
Optional
Disc Scrapers
Optional
Center Sweep Kit
Optional
Tongue Jack
Optional
Dual Wheel Transport Kit
Optional
322-251S continued on next page
6*05/08