Poulan PBGT27H54 ユーザーズマニュアル

02790

MOWER DRIVE BELT REMOVAL 
•     Park tractor on a level surface. En 

gage parking 

brake.

•      Lower attachment lift lever to its lowest position.
•      Disengage belt tension rod from lock bracket.

•     Remove screws from R.H. and L.H. mandrel covers 

and remove covers.

•     Remove any dirt or grass clippings which may have 

accumulated around mandrels and entire upper deck 
surface.

•      Remove belt from electric clutch pulley, both mandrel 

pulleys and all idler pulleys.

MOWER DRIVE BELT INSTALLATION 
•      Install  belt  around  both  mandrel  pulleys  and  around 

idler pulleys as shown.

•      Install belt onto electric clutch pulley.

IMPORTANT:  CHECK BELT FOR PROPER ROUTING IN ALL 
MOWER PULLEY GROOVES.

•      Reassemble R.H. and L.H. mandrel covers. Securely 

tighten all screws.

•      Engage belt tension rod on locking bracket.

•      Raise attachment lift lever to highest position.