New Holland 620TL プリント
New Holland
600TL Series Front-End Loader Specifications
610TL 620TL
Page 1 of 1
LOADER MODEL
610TL
610TL
620TL
620TL
TRACTOR COMPATIBILITY
TT45A
TT50A
TT60A
TT75A
2WD
2WD
2WD
4WD
2WD
4WD
Max. lift height, in. (mm)
109.0 (2769)
111.7 (2837)
114.5 (2908)
118.0 (2997)
114.5 (2908)
118.0 (2997)
Dump clearance, in. (mm)
90.3 (2294)
93.0 (2362)
92.5 (2350)
93.0 (2362)
92.5 (2350)
93.0 (2362)
Digging depth, in. (mm)
6.0 (152)
5.5 (140)
5.0 (127)
5.5 (140)
5.0 (127)
5.5 (140)
Lift capacity @ 500 mm from
bucket pivot pin, lb. (kg)
1320 (599)
1320 (599)
NA
NA
NA
NA
Lift capacity @ 800 mm from
bucket pivot pin, lb. (kg)
NA
NA
2210 (1002)
2150 (975)
2210 (1002)
2150 (975)
Breakout force @ 500 mm from
bucket pivot pin, lb. (kg)
3400 (1542)
3400 (1542)
NA
NA
NA
NA
Breakout force @ 800 mm from
bucket pivot pin, lb. (kg)
NA
NA
4791 (2173)
4520 (2050)
4791 (2173)
4520 (2050)
Reach @ max. lift height, in. (mm)
24.3 (617)
24.3 (617)
34.0 (864)
26.0 (660)
34.0 (864)
26.0 (660)
Bucket rollback angle, degrees
20
20
23
26
23
26
Bucket dump angle, degrees
42
42
45
47
45
47
Loader specifications may vary with tractor model, hydraulic system, tire, size, etc.
Safety begins with a thorough understanding of
the equipment. Always make sure you and
your operators read the Operator’s Manual
before using the equipment. Pay close
attention to all safety and operating
decals and never operate machiner y
without all shields, protective devices
and structures in place.
Visit our Web site at www.newholland.com/na Or, call toll-free: 1-888-290-7377
Design, materials and/or specifications are subject to
change without notice and without liability therefor.
Specifications are applicable to units sold in Canada, the
United States, its territories and possessions, and may
var y outside these areas.
© 2007 CNH America LLC
New Holland is a registered trademark of CNH America LLC.