HP 590159-421 ユーザーズマニュアル

upgrade (for the 256MB cache), and Smart Array Advanced Pack (SAAP).
NOTE:

NOTE:

NOTE: A minimum of 256 MB cache, battery kit, and Smart Array Advanced Pack License Key upgrade
(P/N: 516471-B21) is required to enable RAID 6, 6+0
NOTE:

NOTE:

NOTE: To achieve highest possible stated transfer rate please make sure the firmware on the drive bays
(backplanes) and HP Smart Array controller up to date. Latest firmware is available to download from HP
support web site.
NOTE:

NOTE:

NOTE: HP Smart Array B110i does not support greater than 2TB hard drive.

Internal Storage Devices

Diskette Drives

Via USB only

Optical Drives

Optional SATA 9.5mm DVD-ROM Optical Drive

Optional SATA 9.5mm DVD RW Optical Drive

Drive Bays

One of the following
depending on Model

Up to 4 Non-hot plug SATA 3.5" drives

Up to 4 Hot plug SAS/SATA 3.5" drives

Up to 8 Hot plug SAS/SATA 2.5" drives

Maximum Internal

Maximum Internal
Storage

Storage

One of the following
depending on Model

Non-Hot Plug LFF SATA

12.0TB

4 x 3TB

Hot Plug LFF SATA

12.0TB

4 x 3TB

Hot Plug LFF SATA SSD

1.6TB

4 x 400GB

Hot Plug LFF SAS

8.0TB

4 x 2TB

Hot Plug SFF SATA

8.0TB

8 x 1TB

Hot Plug SFF SATA SSD

3.2TB

8 x 400GB

Hot Plug SFF SAS

8.0TB

8 x 1TB

Hot Plug SAS SSD

6.4TB

8 x 800GB

Interfaces

Parallel

None

Network RJ-45(Ethernet)

2 10/100/1000 NIC ports (plus 1 optional dedicated port for the HP
ProLiant Lights-Out 100i Remote Management)

Serial

Pointing Device (Mouse)

0 (via USB only)

Graphics

Keyboard

0 (via USB only)

USB

5 (two front, one internal, two rear)

NOTE:

NOTE: In order to connect a USB device internally, the internal USB Cable
G6 Kit must be used (536769-B21)
NOTE:

NOTE:

NOTE: Please see the following URL for additional information regarding
USB support:

http://h18004.www1.hp.com/products/servers/platforms/usb-support.html

QuickSpecs

HP ProLiant DL160 Generation 6 (G6)

Standard Features

DA - 13247 Worldwide — Version 51 — November 14, 2011

Page 6