Gravely 915178 - ZT42 ユーザーズマニュアル
EN - 22
TIPPING SEAT FORWARD
Move steering levers to neutral position and
rotate handles outward. Tip seat forward.
rotate handles outward. Tip seat forward.
MOWER DECK REMOVAL AND
INSTALLATION
INSTALLATION
Remove
1. Remove PTO belt from the engine drive
2. Disconnect drag link from the front deck
bracket.
3. Disconnect front and rear trunnions from
the lift arms on both sides of the unit by
removing the 3/8 nuts. Keep hardware
for reinstallation.
removing the 3/8 nuts. Keep hardware
for reinstallation.
4. Slide mower deck out from under unit.
Install
1. Slide mower deck under unit.
2. Connect drag link to front deck bracket.
2. Connect drag link to front deck bracket.
3. Connect front and rear trunnions to the
lift arms on both sides of the unit using
3/8 nuts.
3/8 nuts.
4. Install PTO belt on the engine drive
5. Level and adjust pitch of mower deck.
SERVICE AND ADJUSTMENTS
WARNING: AVOID INJURY.
Read and understand the entire
Safety section before proceeding.
Read and understand the entire
Safety section before proceeding.
Figure 9
1. Seat Tipped Forward
2. Mounting Hardware
3. Steering Levers
2. Mounting Hardware
3. Steering Levers
Figure 10
1. Rear Trunnion
2. PTO Belt
3. Mower Deck
4. Drag Link
5. Front Trunnion
6. Lift Arms
7. Nuts
2. PTO Belt
3. Mower Deck
4. Drag Link
5. Front Trunnion
6. Lift Arms
7. Nuts