Gardena R70Li ユーザーズマニュアル

English - 39

The operation selection button is symbolised by a 
house. When the button has been pressed, the 
selected operation mode is shown in the display. By 
consecutively pressing the button many times, one 
can choose between three different operation modes. 

1.

HOME: 
Sends the robotic lawnmower to the charging 
station. It remains here until another operation 
mode is selected. The text Home is shown in the 
operation window. When the battery is fully 
charged, the robotic lawnmower will remain 
parked in the charging station. The robotic 
lawnmower will first leave the charging station 
and begin mowing again when the operation 
selection is altered to AUTO.

The Home setting is also used after a new 
installation or when changes are made to an 
existing installation to test if the robotic 
lawnmower can follow the guide wire and dock 
with the charging station. See 3.9 Test docking 
with the charging station on page 33. 

2.

AUTO: 
The standard, automatic operation mode where 
the robotic lawnmower mows and charges 
automatically.

3.

MAN: 
When mowing secondary areas (see 
3.4 Installation of the boundary wire on page 21), 
the MAN setting must be used.

If MAN is selected and the robotic lawnmower 
starts when it is out on the lawn, it will mow until 
the battery runs out. It will then stop and the 
“Needs manual charging” message will appear. 
The robotic lawnmower must then be moved 
manually to the charging station and then started 
manually after charging. 

If the robotic lawnmower charges in the MAN 
mode, it will fully charge, move about 20 cm out 
of the charging station and then stop. This 
indicates that it is charged and ready to start 
mowing.

If the main working area has to be cut after 
charging, it is appropriate to switch the operation 
mode to Auto before placing the robotic 
lawnmower in the charging station.