Husqvarna RZ54i / 967003604 ユーザーズマニュアル
47
LUBRICATION
General
When lubricating with an oil can, it must be filled with
engine oil.
When lubricating with grease, unless otherwise
stated, use a high grade molybdenum disulphide
grease.
For daily use, the machine should be lubricated twice
weekly.
When lubricating with an oil can, it must be filled with
engine oil.
When lubricating with grease, unless otherwise
stated, use a high grade molybdenum disulphide
grease.
For daily use, the machine should be lubricated twice
weekly.
Wipe away excess grease after lubrication.
It is important to avoid getting lubricant on the belts
or the drive surfaces on the belt pulleys. Should this
happen, attempt to clean them with spirits. If the belt
continues to slip after cleaning, it must be replaced.
Gasoline or other petroleum products must not be
used to clean belts.
It is important to avoid getting lubricant on the belts
or the drive surfaces on the belt pulleys. Should this
happen, attempt to clean them with spirits. If the belt
continues to slip after cleaning, it must be replaced.
Gasoline or other petroleum products must not be
used to clean belts.
Lubrication Schedule
12/12 Every year
Lubricate with grease gun
Filter change
1/52 Every Week
1/365 Every day
Oil change
Level check