Husqvarna 968999216 ユーザーズマニュアル

49

At the end of the mowing season, the machine 
should be readied for storage (or if it will not be in 
use for longer than 30 days). Fuel allowed to 
stand for long periods of time (30 days or more) 
can leave sticky residues that can disrupt engine 
function.

.

To ready the machine for storage, follow these 
steps:

1.

Thoroughly clean the machine, especially 
under the mower deck. Touch up damage to 
the paint and spray a thin layer of oil on the 
underside of the mower deck in order to avoid 
corrosion.

2.

Inspect the machine for worn or damaged 
parts and tighten any nuts or screws that may 
have become loose.

3.

Change the engine oil; dispose of properly.

4.

Empty the fuel tanks or add a fuel stabilizer. 
Start the engine and allow it to run until the 
stabilizer has reached the injectors.

5.

Remove glow plugs and pour about a 
tablespoon of engine oil into each cylinder. 
Turn over the engine so that the oil is evenly 
distributed. Replace glow plugs. 

6.

Lubricate all grease zerks, joints, and axles.

7.

Remove the battery. Clean, charge, and store 
the battery in a cool place, but protect it from 
direct cold.

8.

Store the machine in a clean, dry place and 
cover it for extra protection.

When ordering spare parts, please specify the 
purchase year, model, type, and serial number. 

Always use genuine Husqvarna spare parts. 

An annual check-up at an authorized service 
workshop is a good way to ensure that your 
machine performs its best the following season.