Husqvarna 968999766 ユーザーズマニュアル

ページ / 85
English
-
31
OPERATION
Weak Battery
If your battery is too weak to start the engine, it should 
be recharged. (See “Battery” in the Maintenance 
Section.)
Jumper Cables
To attach jumper cables
•  Connect each end of the RED cable to the 
POSITIVE (+) terminal on each battery, 
taking care not to short against chassis.
•  Connect one end of the BLACK cable to the 
NEGATIVE (-) terminal of the fully charged 
battery.
•  Connect the other end of the BLACK cable 
to a good CHASSIS GROUND on the mower 
with the discharged battery, away from the 
fuel tank and battery.
To remove cables, reverse order
Remove BLACK cable first from chassis and 
then from the fully charged battery.
•  Remove RED cable last from both batteries.
Jumper cable connection
8011-642
WARNING!
Lead-acid batteries generate 
explosive gases. Keep sparks, 
flame and smoking materials 
away from batteries. Always 
wear eye protection then around 
batteries.
IMPORTANT INfORMATION
Your mower is equipped with a 12-volt 
negative grounded system. The other 
vehicle must also be a 12-volt negative 
grounded system. Do not use your mower 
to start other vehicles.