Husqvarna 968999766 ユーザーズマニュアル

English

-

44

If the engine seems weak or runs unevenly and the 

dust load indicator has turned red the air filter may be 

clogged. If run with a clogged air filter, disruption of 

operation can occur.
Cleaning/replacing the air filter is carried out as 

follows:
Only do so when the dust indicator is red.

1.  Unfasten the two metal clamps on the sides of the 

air filter cover. Remove the air filter cover.

2.  Remove the paper filter. Lightly brush or use mild 

air pressure to clean.

3.  Only remove and replace safety element after the 

paper filter has been replaced 3 or 4 times.

4.  Refit the air filter as follows:
  Check that the seal on the bottom of the paper filter 

is whole.

  Mount the safety element in the air filter housing.
5.  Place the paper filter over the safety element.
6.  Replace the cover over the air filter housing. 

Fasten the two metal clamps making sure the 

cover is snapped into position.

7.  Push top of dust load indicator to reset it.

8058-003

8058-004

8058-005

8058-006