Husqvarna LC 19A ユーザーズマニュアル

English

 – 9

•

Mowing slopes can be dangerous. Do not use the lawn 
mower on very steep slopes.

•

The lawn mower should not be used on inclines greater 
than 15degrees. 

•

On sloping ground you should work along the slope. It is 
much easier to work along a slope than it is to work up and 
down it.

•

Branches, twigs, stones, etc. should be removed from the 
lawn before you start to mow.

•

Do not mow the lawn while walking backwards.

•

Never lift up the lawn mower or carry it around when the 
engine is running. If you must lift the lawn mower, first 
switch off the engine and disconnect the ignition lead from 
the spark plug.

•

Make sure the blades do not hit foreign objects such as 
stones, roots or the like. This can make the blades dull and 
bend the engine shaft. A bent axle gives imbalance and 
heavy vibration, which results in a great risk of the blades 
becoming loose.

•

If any foreign object is hit or if vibrations occur stop the 
machine immediately. Disconnect the ignition lead from 
the spark plug. Check that the machine is not damaged. 
Repair any damage.

•

Never mow more than 1/3 of the length of the grass. This 
especially applies during dry periods. Mow first with the 
cutting height set high. Then check the result and lower to 
an appropriate height. If the grass is really long, push the 
mower slowly and mow twice if necessary.

•

Never run with the machine when it is running. You should 
always walk with the lawn mower.

•

Pay particular attention when pulling the machine towards 
you during work. 

Shut down the engine before changing the cutting height.

The cutting height can be adjusted in 8-10 different steps.

Do not set the cutting height too low as there is a risk that the 
blades might hit ground with unevenness.