Husqvarna MZ6125C / 968999749 ユーザーズマニュアル

CONTROlS

English

-23

9. Fuel Shut Off Valve

The fuel shut off valve is located at the left rear of the

seat. The valve is off when the handle tab is turned

perpendicular to the fuel line.

8011-419

Fuel shut off valve in the CLOSED position.

8061-007

1. Detent Pin
2. Transport latch
3. Foot Pedal
The mower deck’s lifting lever

10. Lifting Lever for the Mower Deck

The lifting lever is used to transfer the mower deck

from the transport position into the preferred cutting

height position.
To set the cutting height, pull out the detent ring and

place it in the desired height’s corresponding hole.
To lower the deck from the transport position, press

forward on the foot pedal while pulling back on the

transport latch. This releases it from the locked

position and allows it to ease down to the detent pin,

setting the selected cutting height.

IMPORTANT INFORMATION
In order to obtain an even cutting height,

it is important that the air pressure in the

front tires is 15 psi and the rear tires is 10

psi.

IMPORTANT INFORMATION
Always use the high position to transport.