Husqvarna Robotic Lawn Mowe ユーザーズマニュアル
30
Automower from
3. Installation
™
If you intend to bury the boundary wire:
•
Make sure to place the boundary wire at least
1 cm and a maximum of 20 cm into the ground.
1 cm and a maximum of 20 cm into the ground.
The boundary wire must not cross the path to and
from an island.
from an island.
Laying the boundary wire in towards the charging
station
The boundary wire can be routed in several different
ways in towards the charging station. The best
alternative is to route the wire completely outside the
charging station, see alternatives 1 and 2 in the
illustration. The wire can also be placed under the
charging station plate as shown in alternative 3 in the
illustration. However, the wire should not be placed
outside alternative 3 because it can then be difficult
for Automower to find the charging station.
station
The boundary wire can be routed in several different
ways in towards the charging station. The best
alternative is to route the wire completely outside the
charging station, see alternatives 1 and 2 in the
illustration. The wire can also be placed under the
charging station plate as shown in alternative 3 in the
illustration. However, the wire should not be placed
outside alternative 3 because it can then be difficult
for Automower to find the charging station.
When connecting to the charging station, the right
end of the boundary wire should be guided into the
right-hand hole and the cable's left end in the
left-hand hole.
end of the boundary wire should be guided into the
right-hand hole and the cable's left end in the
left-hand hole.
3012-686
3012-671
1.
2.
3.
3012-462