Husqvarna 968999692 ユーザーズマニュアル

English

-

52

Anti-scalp rollers
Anti-scalp rollers are properly adjusted when they are 

just slightly off of the ground when the deck is at the 

desired cutting height in the operating position. Anti-

scalp rollers then keep the deck in the proper position 

to help prevent scalping in most terrain conditions.

1.  Adjust the deck to the desired cutting height (see 

“TO ADJUST DECK CUTTING HEIGHT” in the 

operation section of this manual).

2.  Using a ¾" wrench and a 

9

/

16

" wrench, remove the 

nut and shoulder bolt from the anti-scalp roller.

3.  Lower the anti-scalp roller to the ground, and raise 

it up to the next highest hole.

4.  Replace and tighten the nut and shoulder bolt.
5.  Be sure to adjust all of the anti-scalp rollers to the 

same position.

6.  Be sure to readjust the anti-scalp rollers if the 

cutting height is changed.

CZ-9