Cub Cadet SC2400 ユーザーズマニュアル

Start the engine by referring to “7. OPERATING THE 
ENGINE”.

4. Select travel speed.
■ Range Shift Lever

Use the range shift lever to select the speed that best 
suits the intended operation.

■ 4-Wheel Drive Lever

In the 4-wheel drive mode, all the four wheels are 
powered to obtain better traction on difficult-to-travel 
ground.
The 4-wheel drive lever can be set to the ON or OFF 
position only when the tractor is at a standstill.

IMPORTANT: Avoid damage.
●ALWAYS keep the 4-wheel drive lever in the OFF 

position when traveling on a paved surface.

●ALWAYS disengage the 4-wheel drive lever when 

not needed to prevent premature wear of the front 
tires.

●NEVER install tire chains to the front wheels. 

Chains will hit and can damage the tractor.

●If disengaging the 4-wheel drive lever is difficult, 

stop the tractor, turn the steering wheel right and 
left several times. Then attempt to disengage the 
4-wheel drive lever again.

●To minimize tire wear, drive in the 4-wheel drive 

mode only when absolutely necessary. Driving the 
tractor on a paved road in the 4-wheel drive mode 
can accelerate wear of the tires.

●To obtain better traction, keep the front tires at the 

maximum allowable pressure.

●When the 4-wheel drive lever is in the ON position, 

braking will apply to all four wheels.

3014919a

3014904b