Cub Cadet LTX1046M ユーザーズマニュアル

Before performing any maintenance or 

repairs, disengage PTO, set parking brake, stop 

engine and remove key to prevent unintended 

starting.

Refer to the engine Owner’s Manual for all engine maintenance 

procedures and instructions.
NOTE: Maintenance, repair, or replacement of the emission 

control devices and systems which are being done at owner’s 

expense may be performed by any engine repair establishment 

or individual. Warranty repairs must be performed by a Cub 

Cadet Dealer.

If the engine has been recently run, the 

engine, muffler and surrounding metal surfaces will 

be hot and can cause burns to the skin.  Exercise 

caution to avoid burns.

NOTE: The oil filter should be changed at every oil change 

interval. To complete an oil change, proceed as follows:
1. 

Run the engine for a few minutes to allow the oil in the 

crankcase to warm up. Warm oil will flow more freely and 

carry away more of the engine sediment which may have 

settled at the bottom of the crankcase. Use care to avoid 

burns from hot oil.

2. 

Open the tractor’s hood and locate the oil drain port on the 

right side of the engine.

P

P

P

P

P

P

P

P

P

P

P

P

P

P

P

P

P

P

P

P