Cub Cadet Z-Force S ユーザーズマニュアル

P

P

P

P

P

P

P

P

P

P

Before performing any maintenance or 

repairs, disengage PTO, set parking brake, stop engine 

and remove key to prevent unintended starting. 

Refer to the Kawasaki Owner’s Manual for all engine maintenance 

procedures and instructions.
NOTE: Maintenance, repair, or replacement of the emission control 

devices and systems which are being done at owner’s expense may 

be performed by any engine repair establishment or individual. 

Warranty repairs must be performed by a Cub Cadet Dealer.

If the engine has been recently run, the 

engine, muffler and surrounding metal surfaces will 

be hot and can cause burns to the skin.  Exercise 

caution to avoid burns.

To complete an oil change, proceed as follows:
1. 

Run the engine for a short time to warm the engine oil. The 

oil will flow more freely and carry away more impurities. 

Use care to avoid burns from hot oil.

2. 

Locate the oil drain hose/valve on the right side of the 

engine.

3. 

If your engine has the oil drain valve setup shown if Fig. 6-1, 

see the Oil Drain Valve section on page 20.