Cub Cadet CC 550 SP ユーザーズマニュアル

ページ / 24
Assembly & Set-Up
3
9
Contents of Carton
• 
One Lawn Mower
• 
One Grass Catcher
• 
One Side Discharge Chute
• 
One Lawn Mower Operator’s Manual • 
One Engine Operator’s Manual
• 
One Bottle of Oil
Assembly
NOTE: This unit is shipped without gasoline or oil in the engine. 
Fill up gasoline and oil as instructed in the Engine Operation 
section of this manual BEFORE operating your mower.
Handle
1. 
Remove any packing material which may be between 
upper and lower handles.
a.  Pull up and back on upper handle as shown in Fig. 
3-1. Do not crimp cable while lifting the handle up. 
Remove star knobs from handle mounting brackets 
and secure the lower handle onto the handle 
brackets by placing the lower hole of the lower 
handle onto the pins of the handle brackets.
b.  Tighten star knobs securing upper handle to lower 
handle. See Fig. 3-1. Make sure that each carriage 
bolt is seated properly in the handle.
2. 
Tighten star knobs securing lower handle to handle 
brackets. See Fig. 3-2. Make certain the lower handle is 
seated securely into the handle mounting brackets.
Figure 3-1
3. 
The rope guide is attached to the right side of the upper 
handle. Loosen the wing nut which secures it to the upper 
handle. Refer to Fig. 3-3.
Figure 3-2
Figure 3-3
A
B
B
A
C
D
B