Cub Cadet 109 ユーザーズマニュアル

Now that you have set up your lawn mower 
for operation, get acquainted with its controls 
and features. These are described below and 
illustrated  this page. This knowledge will allow 
you to use your new equipment to its fullest 
potential.

The blade control handle is attached to the 
upper handle of the mower. Depress the blade 
control handle to operate the unit. Release it to 
stop engine and blade. 

Your engine is equipped with a constant speed 
throttle, which is set at full throttle for best 
performance.

One adjustment lever is located on each wheel 
and is used to adjust the cutting height. All four 
levers have to be at the same relative position 
to ensure uniform cut.

The recoil starter is attached to the right upper 
handle. Stand behind the unit and pull the recoil 
starter rope to start the unit.

The mulching plug is used only for mulching 
purposes. This process recirculates the clip-
pings back to the lawn. Do not operate the 
mower if the mulching plug is not firmly situated 
on the unit.

1.  Check oil level and add oil if necessary. Follow the 

instructions in the engine operator’s manual. 

2.  Service the engine with gasoline as instructed in the 

engine operator’s manual.  See Figure 1 above for 
location of gas cap.

Use extreme care 
when handling 
gasoline. Gasoline is 
extremely flammable 
and the vapors are 
explosive. Never fuel 
the machine indoors 
or while the engine 
is hot or running. 
Extinguish cigarettes, 
cigars, pipes and 
other sources of 
ignition.