American Standard 2664.118C プリント
H69
© 2008 AS America Inc.
SCALA CORNER™
WHIRLPOOL AND BATHING POOL
HIGH GLOSS
Revised 2/08
SCALA CORNER™ WHIRLPOOL AND
BATHING POOL
BATHING POOL
❏
2664.218C Whirlpool featuring System I,
Left-hand drain outlet
❏
2664.118C Whirlpool featuring System I,
Right-hand drain outlet
• Acrylic with fiberglass reinforcement
• EverClean
• EverClean
®
System
• Pre-leveled tub bottom
• Integral 2-sided tile/water retention flange
• Dual, molded lumbar back rests
• 1.25 HP single speed, self-draining pump/motor
• Factory installed power cord with plug
• Six multi-directional and flow-adjustable jets
• Deck-mounted air switch On/Off
• Two air volume controls
• Factory installed and tested whirlpool system
• Integral 2-sided tile/water retention flange
• Dual, molded lumbar back rests
• 1.25 HP single speed, self-draining pump/motor
• Factory installed power cord with plug
• Six multi-directional and flow-adjustable jets
• Deck-mounted air switch On/Off
• Two air volume controls
• Factory installed and tested whirlpool system
❏
2664.218 Whirlpool, Left-hand Drain Outlet
❏
2664.118 Whirlpool, Right-hand Drain Outlet
• Same as above except without the EverClean
®
System
❏
2664.202 Bathing Pool only, Left-hand
Drain Outlet
❏
2664.102 Bathing Pool only, Right-hand
Drain Outlet
Nominal Dimensions:
1524 x 1524 x 502mm
(60" x 60" x 19-3/4")
1524 x 1524 x 502mm
(60" x 60" x 19-3/4")
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
American Standard whirlpools with EverClean
®
incorporate a patented silver-ion additive right
into the circulation piping to protect the pipes
from mold, mildew, algae and fungus that could
cause deterioration or staining of the pipes.
into the circulation piping to protect the pipes
from mold, mildew, algae and fungus that could
cause deterioration or staining of the pipes.
SEE REVERSE FOR PRODUCT DIMENSIONS
AND SPECIFICATIONS
AND SPECIFICATIONS
To Be Specified - Required:
❏
❏
Color:
❏
Bath Filler: (specify finish)
❏
Bath Drain: 1583.470 (specify finish)
To Be Specified - Optional:
❏
❏
Jet Trim Ring Kit: 9860.200-two per kit (specify finish)
for Body Massage Jets only
For color/finish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
see the Product Selector and Pricing Guide.