American Standard 6030Y2A.202 プリント
H127
© 2008 AS America Inc.
ACRYLUX
™
60" x 30" w/INTEGRAL APRON
AFR WHIRLPOOL AND BATHING POOL
HIGH GLOSS
ACRYLUX 60" x 30" w/INTEGRAL APRON
ABOVE-FLOOR-ROUGH
ABOVE-FLOOR-ROUGH
❑
6030Y2A.102 AFR Bathing Pool, Right Drain
❑
6030Y2A.202 AFR Bathing Pool, Left Drain
Product Features:
• Above-floor-rough installation
• High-gloss acrylic-capped ABS with
• Above-floor-rough installation
• High-gloss acrylic-capped ABS with
fiberglass reinforcement
• Integral apron
• Integral three-sided, tiling/water retention flange
• Integral lumbar support
• Pre-leveled tub bottom
• Integral three-sided, tiling/water retention flange
• Integral lumbar support
• Pre-leveled tub bottom
❑
6030Y2A.118 AFR Whirlpool, Right Drain
❑
6030Y2A.218 AFR Whirlpool, Left Drain
Whirlpool Features:
• 1.25 hp, single-speed pump motor
• 6 whirlpool jets
– 4 adjustable jets
– 2 mini-jets in the lumbar area
• Deck mounted air on/off switch
• Removable access panel
• 1.25 hp, single-speed pump motor
• 6 whirlpool jets
– 4 adjustable jets
– 2 mini-jets in the lumbar area
• Deck mounted air on/off switch
• Removable access panel
Nominal Dimensions:
59-7/8" x 30" x 18"
(1521 x 762 x 457mm)
59-7/8" x 30" x 18"
(1521 x 762 x 457mm)
For use with:
• 6030Y1.BW Bath Wall Set
• 6030Y1.BWT Bath Tile Wall Set
• Tub can also be installed without
• 6030Y1.BW Bath Wall Set
• 6030Y1.BWT Bath Tile Wall Set
• Tub can also be installed without
Acrylux wall set
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• UL 1795 for Hydromassage Bathtubs
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
Meets or Exceeds the Following Specifications:
• UL 1795 for Hydromassage Bathtubs
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
Revised 5/08