American Standard 2425LC-LHO プリント
HD-7
© 2007 American Standard Inc.
LIFETIME™ 5' X 32" IA-LHO/RHO
WHIRLPOOLS BY AMERICAN STANDARD
HIGH GLOSS ACRYLIC
LIFETIME™ 5’ X 32”IA-LHO / RHO
Comfortable bathing design with form-fitted backrest
and molded-in armrests
Comfortable bathing design with form-fitted backrest
and molded-in armrests
❏
Model# 2425L-LHO Built-In Integral Apron
Left Hand Drain Outlet (specify color)
❏
Model# 2425L-RHO Built-In Integral Apron
Right Hand Drain Outlet (specify color)
• Acrylic with fiberglass reinforcement
• Lifetime Overflow Drain for maximum
water depth
• Integral apron with removable access panel
• Integral three-sided, tiling / water
retention flange
• 1.4 HP self-draining pump/motor with dry
run seal
• Eight flow adjustable jets including:
Two adjustable Ideal Flow Comfort Jets™
Six adjustable Comfort Jets™
• Two silent air volume controls
• Side-mounted On/Off control
• Designed with undermount installation option
• Complete factory installed and tested
whirlpool system
❏
Model# 2425LC-LHO Built-In Integral Apron
Left Hand Drain Outlet (specify color)
❏
Model# 2425LC-RHO Built-In Integral Apron
Right Hand Drain Outlet (specify color)
• Same as above with the EverClean™ whirlpool
system. The EverClean™ antimicrobial system
incorporates AlphaSan®, a patented
antimicrobial agent manufactured right into the
circulation system components, which
suppresses the growth of unsightly algae,
fungus, mold and mildew.
Nominal Dimensions:
60” x 32” x 21-1/2”
(1524 x 813 x 546mm)
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS
AND PRODUCT SPECIFICATIONS
Components Required:
❏
❏
Bath Filler*: (specify finish)
❏
Bath Drain: 1599.205.XXX (specify color)
OR 1599.500.020 (white only)
Custom Accessories Available:
❏
❏
E-Z-Install™ Whirlpool Heater - EZHEAT-100
Revised 7/07
For color/finish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
see the Product Selector and Pricing Guide.
NOTE: E-Z-Install™ Whirlpool Heater is designed to
maintain water temperature during operation. It will not heat
cold water to desired bathing temperature.
maintain water temperature during operation. It will not heat
cold water to desired bathing temperature.
* See American Standard Faucet Selector
AlphaSan® is a registered trademark of Milliken & Co.