American Standard 2806.018WC プリント
H35
© 2007 American Standard Inc.
HERITAGE 6'™
WHIRLPOOL
HIGH GLOSS
Revised 6/07
HERITAGE 6'™ WHIRLPOOL
❏
2806.018WC Whirlpool Featuring System I:
• Acrylic with fi berglass reinforcement
• EverClean™ whirlpool system featuring
Antimicrobial AlphaSan
• EverClean™ whirlpool system featuring
Antimicrobial AlphaSan
®
• Pre-leveled tub bottom
• Dual, molded-in arm rests
• Integral faucet deck area
• 2.0 HP, two speed, self-draining pump/motor
• Factory installed power cord and plug
• Eight multi-directional and fl ow-adjustable
jets including:
• Dual, molded-in arm rests
• Integral faucet deck area
• 2.0 HP, two speed, self-draining pump/motor
• Factory installed power cord and plug
• Eight multi-directional and fl ow-adjustable
jets including:
- Two Ideal-fl ow jets
- Four body massage jets
- Two recessed back-rest jets
• Deck-mounted air switch On/Off
• Two silent air volume controls
• Quick Connect Safe-T-Heater
connection system
• Factory installed and tested whirlpool system
• Two silent air volume controls
• Quick Connect Safe-T-Heater
connection system
• Factory installed and tested whirlpool system
❏
2806.028WC Whirlpool Massage Featuring
System II
Same as 2806.018WC except:
• 2.0 HP, two speed self-draining pump/motor
with dry run seal and Pulse feature
• Deck-mounted electronic On/Off with 20 minute
built-in timed safety shut off and chrome bezel
• 2.0 HP, two speed self-draining pump/motor
with dry run seal and Pulse feature
• Deck-mounted electronic On/Off with 20 minute
built-in timed safety shut off and chrome bezel
Nominal Dimensions:
1829 x 908 x 546mm
(72" x 35-3/4" x 21-1/2")
1829 x 908 x 546mm
(72" x 35-3/4" x 21-1/2")
Compliance Certifi cations -
Meets or Exceeds the Following Specifi cations:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
Meets or Exceeds the Following Specifi cations:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS
AND PRODUCT SPECIFICATIONS
To Be Specifi ed - Required:
❏ Color:
❏ Color:
❏ Bath Filler: (specify fi nish)
❏ Bath Drain: 1583.470 (specify fi nish)
To Be Specifi ed - Optional:
❏ Safe-T-Heater*: 9075.120
❏ Safe-T-Heater*: 9075.120
❏ Grab Bar Kit: 9822-200-two per kit (specify color)
❏ System II Control Bezel: 9861.100 (specify fi nish
For color/fi nish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
see the Product Selector and Pricing Guide.
* NOTE: the Safe-T-Heater is designed to maintain water
temperature during operation. It will not heat cold water to
desired bathing temperature.
temperature during operation. It will not heat cold water to
desired bathing temperature.