American Standard 2775E SERIES ユーザーズマニュアル

752874-100 Rev. C

© American Standard Inc. 2003
All product names listed herein are trademarks
of American Standard Inc. unless otherwise noted.

FOR AFTER-SALES SERVICE CALL 1 (800) 223-0068 WEEKDAYS.

for selecting an American Standard bath. Your new 
bath is shipped to you after careful inspection. The 
whirlpool version is completely assembled with pump, 
motor, and system piping. All you need to finish the 
installation are your selected fittings and electrical 
connections for a whirlpool.

To insure maximum performance and pleasure from 
this product, please follow the instructions and 
cautions. 

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor 
immediately.

After inspection and during installation, protect the bath from construction damage. After installation, and before 
enclosing with wallboard, tile, etc., water test the unit and check for leaks.

Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect 
the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump, 
motor, or piping system.

Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and 
enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead 
(required for recess installations).

Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.  

List of Optional Components (not included):
•  Flex-Jet Pulse Jet Kit*
•  Flex-Jet Soft Jet Kit*
•  E-Z-Install Heater*
•  Tile Bead Kit*

List of Required Components (not included):
•  Drain*                      •  Bath Filler* 

* see your Home Depot Retailer

Tools
•  Level
•  Tape Measure
•  Pipe Wrench
•  Slip Joint Pliers
•  Screw Driver
•  Standard
      Woodworking Tools
•  Personal Safety
      Equipment
•  Caulking Gun

Supplies
•  Nails
•  Putty
•  Caulking (waterproof)
•  1 x 3 or 2 x 2
      Stringers
•  Drop Cloth
•  20 amp GFI
      Outlet
•  Cement, Plaster,
      Grout

1524mm

(60)

70mm REF.
(2-3/4)

165mm
(6-1/2)

279mm
(11)

RECOMMENDED
FITTING LOCATION
64 X 330mm (2-1/2 X 13)

229 X 305mm
(9 X 12)
CUTOUT IN
FLOOR FOR
DRAIN

ON/OFF
SWITCH

PROVIDE ACCESS
TO PUMP FOR
SERVICING ON ALL
INSTALLATIONS

OUTLINE OF
CUTOUT

2159mm

(85)

1080 mm

(42-1/2)

C/L

1524mm

(60)

1076mm

(42-3/8)

1080mm

(42-1/2)

PUMP

C/L OF
DRAIN OUTLET

1-1/2 O.D. TAILPIECE

LEVELING STRINGER

NOT FOR SUPPORT

70mm

(2-3/4)

117mm

(4-5/8)

1-1/2 N.P.T.M.

THREADS

38 mm REF.
(1-1/2)

C/L OF
OVERFLOW

76mm
(3)

464mm

(18-1/4)

502mm

(19-3/4)

ROUGH
FLOOR

INTEGRAL

SUPPORT

FEET

IN-LINE
HEATER
REMOVABLE
BLANK

  85 X 60 X 19-3/4In.

(2159mm X 1524 mm X 502mm)

130 Lbs. (59 Kg.)

756 Lbs. (343 Kg.)

75 Gal. (284 L.)
60 Gal. (227 L.)

32 X 32 In. (813 mm X 813 mm)

46 X 46 In. (1168 X 1168mm)

14 In. (356 mm)

34 Lbs./Sq. Ft. (115 Kgs/Sq. m.)

41.7
70.4

INSTALLED SIZE

WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
MIN. OPERATING GAL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT

3

)

2.1 HP, 14.4 AMPS, 120V.

PUMP