American Standard 2425.018W プリント

HIGH GLOSS ACRYLIC

© 2003 American Standard Inc.

BV-20

3/03

❏

Color:

❏

Bath Faucet:  (specify finish)

❏

Bath Drain:  1583.470 (specify finish)

❏

Safe-T-Heater*:  9075.120

❏

Bath Caddie:  9533.100 (in Chrome only)

❏

Jet Trim Ring Kit:  9860.200-two per kit (specify finish)

For color/finish availability and other faucet choices,
please see the Product Selector and Pricing Guide.

* NOTE: the Safe-T-Heater is designed to maintain water
temperature during operation.  It will not heat cold water to
desired bathing temperature.

❏

• Acrylic with fiberglass reinforcement
•  Pre-leveled tub bottom
•  Form-fitted backrest
•  Dual, molded-in arm rests
• 1.5 HP single speed, self-draining pump/motor
•  Factory-installed power cord with plug
• Eight multi-directional and flow-adjustable jets

including:

- Two Ideal-flow jets
- Four body massage jets
- Two recessed back-rest jets

•  Deck-mounted air switch On/Off
• Two silent air volume controls
•  Quick Connect Safe-T-Heater connection

system

• Factory installed and tested whirlpool system

❏

•  Same as above except with the StayClean™

whirlpool system featuring Antimicrobial 
AlphaSan®

Nominal Dimensions:  
60” x 32” x 21-1/2” (1524 x 813 x 546mm)

Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage 

Bathtubs UL 1795

• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density

NOTE:  Roughing-in dimensions and product
specifications shown on reverse side of page.