North Star MA 1578111D ユーザーズマニュアル

ページ / 15
 
13
Troubleshooting 
 
 
Problem 
 
Engine will not start
 
SOLUTION:  A,B 
Low/Surging pressure or no water flow 
SOLUTION:  C,D,E,F,G,H 
No chemical injection 
SOLUTION:  I,J,K,L 
Cause Solution 
A- Low oil shutdown 
See engine manual for oil requirements 
B- Engine starting instructions not followed 
See engine manual for starting instructions 
C- Insufficient water supply 
See water supply section of this manual 
D- Plugged pump inlet filter 
See maintenance section of this manual 
E- Wrong nozzle 
Make sure high pressure nozzle is being used  
F- Plugged nozzle 
Remove nozzle, check for blockage 
G- Worn nozzle 
Replace nozzle 
H- Leak in pressure hose 
Replace pressure hose 
I- Wrong nozzle 
Make sure chemical nozzle is being used 
J- Back pressure from extra long discharge hose 
Try shorter hose 
K- Leak in chemical siphon hose 
Replace hose – use hose clamps if necessary 
L- Chemical strainer not submerged 
Make sure strainer is completely submerged  
 
 
 
 
 
 
 
 
 
 
 
 
Any Questions, Comments, Problems or Parts Orders 
Call Northstar Customer Service 1-800-270-0810