North Star M1577541F ユーザーズマニュアル
18
Maintenance
Maintenance Mode
Before performing any maintenance on the pressure washer, it must be placed in maintenance mode.
1.) Turn off engine.
2.) Turn off water supply.
3.) Squeeze trigger to relieve system pressure.
4.) Unplug spark plug wire from spark plug, (see engine owners’ manual).
2.) Turn off water supply.
3.) Squeeze trigger to relieve system pressure.
4.) Unplug spark plug wire from spark plug, (see engine owners’ manual).
Maintenance Schedule
What to Check
When To Check
What to Do
Inlet Filter
Each Use
Visually inspect and clean inlet filter with clear water.
Pressure Hose
Each Use
Visually inspect pressure hose and hose couplings. Replace
hose if any of the following is evident:
hose coupling is damaged, wire mesh is exposed or
damaged, hose is permanently kinked or flattened, outer
hose cover is blistered or loose.
hose if any of the following is evident:
hose coupling is damaged, wire mesh is exposed or
damaged, hose is permanently kinked or flattened, outer
hose cover is blistered or loose.
Bolts
Each Use
Tighten any loose bolts.
Engine Oil
See engine manual See engine manual for oil change instructions
Pump Oil
After 1
st
50hrs,
then 3mo/500hr
Change pump oil. See pump oil change instructions.
(On page 19)
(On page 19)