Black Box MPSH16-D20-120V ユーザーズマニュアル

CHAPTER 15: Saving & Restoring Parameters

169

15.3. Restoring Previously Saved Parameters

If you make a mistake while configuring the Outlet Managed PDU, and wish to

return to the previously saved parameters, the Text Interface’s "Reboot System"

command (/I) offers the option to reinitialize the unit using previously backed up

parameters. This allows you to reset the Outlet Managed PDU to previously saved

parameters, even after you have changed parameters and saved them.

Notes:

• The Outlet Managed PDU will automatically backup saved

parameters once a day, shortly after Midnight. This configuration
backup file will contain only the most recently saved parameters,
and will be overwritten by the next night’s daily backup.

• When the /I command is invoked, a submenu will be displayed

which offers several Reboot options. Option 5 is used to
restore the configuration backup file. The date shown next to
option 5 indicates the date that you last changed and saved unit
parameters.

• If the daily automatic configuration backup has been triggered

since the configuration error was made, and the previously
saved configuration has been overwritten by newer, incorrect
parameters, then this function will not be able to restore the
previously saved (correct) parameters.

To restore the previously saved configuration, proceed as follows:

1. Access command move via the Text Interface, using a username/password

that permits access to Administrator level commands (see Section 5.1.1.)

2. At the Outlet Managed PDU command prompt, type

/I and press [Enter].

The unit will display a submenu that offers several different reboot options.