Kärcher K 3000 G ユーザーズマニュアル
4
Step 6
Slide the throttle
control to the run
position.
control to the run
position.
Step 7
Push the
primer ball three
times. Wait 3 seconds
between each push.
Note: in cold weather
push 5 times.
times. Wait 3 seconds
between each push.
Note: in cold weather
push 5 times.
Step 8
Pull the starter handle. If
the engine fails to start after 3 pulls
squeeze the trigger gun to release
pressure, and repeat step 8.
squeeze the trigger gun to release
pressure, and repeat step 8.
OPERATING INSTRUCTIONS
Step 1
Connect the high pressure hose to
the unit’s high pressure outlet.
Step 2
Insert the spray wand into
the wand extension. Push in and turn
clockwise to lock spray wand in place.
clockwise to lock spray wand in place.
Step 3
Connect
garden hose to unit’s
water inlet.
water inlet.
Step 4
Connect
garden hose to the
cold water source
and turn water on
completely.
cold water source
and turn water on
completely.
Step 5
Trigger the gun to
eliminate trapped air, wait for a
steady flow of water to emerge
from the spray nozzle.
steady flow of water to emerge
from the spray nozzle.
No tools required.
You are now ready
to operate your
Karcher 3000 G
Pressure Washer.
to operate your
Karcher 3000 G
Pressure Washer.
3
ASSEMBLY INSTRUCTIONS
Step 1
Attach the handle to the frame of the
pressure washer. Align holes, insert bolt, and
tighten with knob.
tighten with knob.
Step 2
Slide the wand extension
into the gun. Turn the wand collar
clockwise onto the gun threads
until tight.
clockwise onto the gun threads
until tight.
Step 3
Check oil level. Oil level should always
be between the “FULL” and “ADD” marks on the
dipstick. Be sure the machine is level when check-
ing the oil level. (Refer to the engine’s operating
manual for seasonal grades.)
dipstick. Be sure the machine is level when check-
ing the oil level. (Refer to the engine’s operating
manual for seasonal grades.)
Step 4
Fill gas tank with unleaded
gasoline. Do not use leaded gasoline.
Important! Do not run the engine with
a high or low oil level as this can cause
engine damage. If you have further ques-
tions regarding the engine, please refer to
the engine’s operating manual included
with the unit.
a high or low oil level as this can cause
engine damage. If you have further ques-
tions regarding the engine, please refer to
the engine’s operating manual included
with the unit.
K3000G Manual 11/30/01 4:56 PM Page 4