Harbor Freight Tools 97005 ユーザーズマニュアル

Page 7

SKU 97005

Maintain labels and nameplates on 

5. 

the equipment.  These carry impor-

tant information.  If unreadable or 

missing, contact Harbor Freight Tools 

for a replacement.
Have the equipment serviced by a 

6. 

qualified repair person using only 

identical replacement parts.  This will 

ensure that the safety of the equip-

ment is maintained.  Do not attempt 

any service or maintenance proce-

dures not explained in this manual 

or any procedures that you are un-

certain about your ability to perform 

safely or correctly.
Store equipment out of the reach of 

7. 

children.
Follow scheduled engine and equip-

8. 

ment maintenance.

Do not smoke, or allow sparks, 

1. 

flames, or other sources of ignition 

around the equipment, especially 

when refuelling.
Do not refill the fuel tank while the 

2. 

engine is running or hot.
Do not fill fuel tank to the top.  Leave 

3. 

a little room for the fuel to expand as 

needed.
Refuel in a well-ventilated area only.

4. 

Fuel

Type

89+ octane unleaded gasoline

Capacity

1.7 Gallons

Engine

Oil

Type

SAE 25W (above 32° F)

SAE 15W-40 (at 32° F or below)

Capacity

37.2 Ounces (1.1L)  

Pump Oil

Type

SAE 25W (above 32° F)

SAE 15W-40 (at 32° F or below)

Capacity

15.2 Ounces (0.45L)

Note: Additional specifications found in the 

TECHNICAL ENGINE SPECIFICATIONS 

chart in this manual.

The emission control system for this 

engine is warranted for standards set by 

the U.S. Environmental Protection Agency 

and by the California Air Resources Board 

(also known as CARB-Phase II).  For 

warranty information, refer to the last 

pages of this manual.

At high altitudes, the engine’s 

carburetor, governor, and any other parts 

that control the fuel-air ratio will need to be 

adjusted by a qualified mechanic to allow 

efficient high-altitude use and to prevent 

damage to the engine and any other 

devices used with this product.