Kohler 8030A ユーザーズマニュアル

2

1071288-AN2-F    09/03/12

1/2" NPT

79 mm 

Min Clearance

Center of 

Water Inlet

251 mm

67 mm

60 mm

217 mm 127 mm

All information is based on the latest product information available at the time 

of publication. Kohler Co. reserves the right to make changes in product 

characteristics, packaging, or availability at any time without notice. 

Please leave these instructions for the consumer.

1. Flush the water supply pipes thoroughly to remove any debris.

2. An in line water filter must be used with this product.

3. Inspect the supply pipes for damage. Replace as necessary.

4. Observe local plumbing codes.

5. The recommended working pressure for the shower head is 150KPa to 

    500KPa.  If the pressure exceeds 500KPa a pressure reducer is required.

6. Maximum water and environmental temperature for the shower head is 

60C. Note: If a heater is present, make sure to keep it away from the shower 

head as otherwise the environmental temperature may exceed 60C.

7. All installations should comply with the relevant requirements of AS/NZS 

3500 and AS/NZS 6400.