Ariens 924332 1124 ユーザーズマニュアル

GB - 29

1. Fuel tank is empty.
2. Fuel shut-off valve closed.
3. Build up of dirt and residue 

around 
governor/carburetor.

4. Key Switch not in run 

position.

5. Ignition switch starter 

circuit not functioning.

6. Battery discharged, wires 

loose.

1. Fill fuel tank.
2. Open fuel shut-off valve.
3. Clean area around 

governor/carburetor.

4. Put Key Switch into run position.

5. Check for a bad starter or 

connections.

6. Check battery and connections.

1. Out of fuel.
2. Fuel shut-off valve closed.

3. Mechanical jam in blower 

rake or impeller.

4. Polluted fuel supply.
5. Faulty spark plug.

1. Fill fuel tank.
2. Open fuel shut-off valve.

3. Turn off engine, remove key, and 

wait for all moving parts to stop. 
Check for and remove 
obstruction and repair before 
restart.

4. Replace with clean fuel.
5. Replace or clean spark plug.

1. See Engine Manual.

1. Friction disc not adjusted 

properly.

2. Traction belt not 

functioning.

3. Speed selector not 

adjusted properly.

1. Repair or replace friction disc. 

See Service and Adjustments.

2. Repair or replace traction drive 

belt. See Service and 
Adjustments.

3. Adjust speed selector. See 

Service and Adjustments.

1. Friction disc wear.

1. Normal friction disc wear. 

Chunks or large pieces of rubber 
mean friction disc should be 
checked and replaced as 
necessary.

1. Shear bolts broken.

2. Attachment clutch/brake 

not adjusted properly.

3. Attachment drive belt worn 

or damaged.

1. Replace shear bolts (see Shear 

Bolts on page 23).

2. Adjust attachment clutch/brake 

(see Attachment Clutch/Brake 
Adjustment on page 24).

3. Replace attachment drive belt 

(see Attachment Clutch/Brake 
Adjustment on page 24).