Ariens 924336 ST11526DLE ユーザーズマニュアル

ページ / 32
GB - 6
SAFETY DECALS AND 
LOCATIONS
ALWAYS replace missing or damaged Safety 
Decals. Refer to figure below for Safety Decal 
locations.
1. DANGER!
2. WARNING!
3. DANGER! 
SAFETY RULES
Read, understand, and follow all safety 
practices in Owner/Operator Manual before 
beginning assembly or operating. Failure to 
follow instructions could result in personal 
injury and/or damage to unit.
ALWAYS remove key and/or wire from spark 
plug before assembly, maintenance or service. 
Unintentional engine start up can cause death 
or serious injury.
Complete a walk around inspection of unit and 
work area to understand:
  • Work area   • Your unit   • All safety decals
ALWAYS check overhead and side clearances 
carefully before operation. ALWAYS be aware 
of traffic when operating along streets or 
curbs.
Keep children and people away. Keep children 
out of work area and under watchful care of a 
responsible adult.
NEVER allow children to operate or play on or 
near unit. Be alert and shut off unit if children 
enter area.
DO NOT allow adults to operate unit without 
proper training.
ROTATING PARTS. 
Keep clear of auger while engine 
is running.
• Read Operator’s Manual.
• Allow operation only by 
properly trained adult, never 
children.
• Stop engine and remove 
ignition key prior to leaving 
the operator’s position for any 
reason.
• Keep all controls, guards and 
safety devices properly 
serviced and functional.
• Never direct discharge 
towards persons or property 
that may be injured or 
damaged by thrown objects.
Read Owner/Operator Manual.
Keep people away from unit while 
operating. Keep children out of 
work area and under watchful 
care of a responsible adult.
OS6600
1
2
3
Figure 2
OS2080
OL1801
Never direct discharge towards 
persons or property that may be 
injured or damaged by thrown 
objects.
Stop engine, remove key, read 
manual before making any 
repairs, adjustments.
Wear appropriate hearing 
protection.
ONLY use clean-out tool to clear 
blockages. NEVER use your 
hands.
ROTATING PARTS! ONLY use 
clean-out tool to clear blockages. 
NEVER use your hands. High 
speed impeller rotates below 
discharge opening. Wait for all 
moving parts to stop before 
removing clogs or servicing.
OL0910
OS6610