John Deere ST1332 ユーザーズマニュアル

33

MTF−051059L

1. Remove spark plug wire.

2. Have someone engage auger drive.

3. Measure the distance between the belt guide and belt.

The distance should be 1/8 inch (3.175 mm) for guide.
See Figure 41.

4. If adjustment is necessary, loosen belt guide mounting

bolt. Move belt guide to the correct position. Tighten
mounting bolt.

5. Reinstall belt cover.

6. Reconnect spark plug wire.

Figure 41

Belt Guide

1/8 Inch (3.17 mm)

Auger Idler 

Pulley Engaged

1. Remove spark plug wire.

2. Have someone engage the traction drive.

3. Measure the distance between the two belt guides and

traction drive belt. Set the distance for the two belt
guides as shown in Figure 42.

4. If adjustment is necessary, loosen belt guide mounting

bolt. Move belt guide to the correct position. Tighten
mounting bolt.

5. Reinstall belt cover.

6. Reconnect spark plug wire.

Figure 42

 Belt Guide

1/16 Inch 

(1.6 mm)

Traction Drive Idler 

Pulley Engaged

Traction

Drive Belt

3/16 Inch 

(4.8 mm)

 Belt Guide