Poulan 96192004301 ユーザーズマニュアル

5

NOTE: The multi-wrench may be used for assembly of the 

chute rotator head to snow thrower and making ad just ments 

to the skid plates.
UNFOLD UPPER HANDLE
1.  Raise upper handle to the operating position and 

tight en handle knobs securely.  Additional carriage 

bolts, washers and handle knobs are in bag of parts.  

Use to secure upper handle to lower handle.  Install 

in lower holes in handles.

INSTALL SPEED CONTROL ROD (See Figs. 1 and 2)
1.  Remove plastic tie securing rod to lower handle.
2.  Insert rod into speed control bracket and secure with 

retainer spring.

(See Figs. 3 and 4)
The traction drive control rod is installed on the snow 

thrower.
1.  Remove plastic tie securing rod to lower handle.
2.  With top end of rod positioned under left side of control 

panel, push rod down and insert top end of rod into hole 

in drive control bracket.  Secure with retainer spring.