Poulan 189539 ユーザーズマニュアル

7

The tires on your snow thrower were overinfl ated at the fac-
tory for shipping purposes.  Correct and equal tire pres sure 
is important for best snow throwing performance.

•      Reduce tire pressure to 14–17 PSI.

NOTE: The multi-wrench provided in your parts bag may 
be used to install the chute rotater head.

1.    Place discharge chute assembly on top of chute base 

with discharge opening toward front of snow thrower.

2.      Position chute rotater head over chute bracket.  If nec es -

sary, rotate chute assembly to align square and pin on un-
 der side of chute rotater head with holes in chute brack et.

3.    With  chute  rotater  head  and  chute  bracket  aligned, 

po si tion chute rotater head on pin and threaded stud 
of mounting bracket.

4.    Install 3/8 washer and locknut on threaded stud and 

tighten securely.