Alvin PXB42 プリント

© Keep all adjustment knobs tight to 

ensure straightedge stays parallel

© Clean board surface and underside of blade with mild detergent and soft cloth. Wipe dry
© Avoid direct exposure to sunlight or extreme heat
© Protect your PXB from damage by storing and transporting in a protective case
© Do not move straightedge with brakes tightened; always move straightedge with a smooth, easy motion

It is recommended that you follow this sequence when making 
adjustments to the position of the straightedge blade:

1. Set the brakes for optimum braking strength

© Unscrew brake knobs as far as they will go.
© Retighten brake knobs one full revolution only
© Loosen top adjustment knobs
© Push metal side brackets toward the center until

both brake pads rest against edges of board

© Retighten top adjustment knobs
© Brakes are now set and ready to use. Simply

tighten and loosen brake knobs as necessary

© Be sure to keep top adjustment knobs tightly 

secured or the brakes will not function

2. Set straightedge blade parallel to edge of board

© Loosen one wire capture screw on either side of the blade
© Pivot the blade until it is in the desired parallel position
© Retighten wire capture screw

With proper care and handling, your PXB will provide you with years of accurate and productive use.