Multiquip SP1CE13H18 ユーザーズマニュアル

The MQ Whiteman SP1 series 

walk-behind saws are designed

for  

wet  cutting of concrete or asphalt utilizing Diamond Blades.

These saws have been engineered for general and industrial
flat sawing applications.The reinforced steel box frame design
adds strength necessary to reduce blade vibrations while cutting.
By minimizing blade vibrations the performance of the blade is
enhanced and thus the life of the blade is extended.

Heavy-duty front and rear axles, sturdy oversized wheels, and
industrial undercarriage assembly ensure accurate tracking and
years of reliable use.

Additionally, the general strength-to-weight ratio design of the
frame and chassis assembly provides for optimum weight
distribution to keep the blade running true in the cut.  A rugged
spindle bearing assembly ensures minimal flutter and shaft
harmonics providing the most advantageous condition for a
diamond blade at operating speeds.

The SP1 series saw comes equipped with an 18-inch blade guard
and handles Diamond Blade  ranging in size from 12-18-inches in
diameter.

An ACME thread, manual raise/lower assembly easily raises and
lowers the blade and locks it into position to ensure a constant depth
cut.  All SP1 series saws are equipped with a retractable cutting
guide, oversized roller bearing wheels, industrial spindle bearings,
and a rigid steel frame.

All SP1 series saws provide a hardy water plumbing system that
evenly distributes water volume and optimum flow rate to both
sides of the blade to keep it cool when cutting. The basic  water
system provides a valve that  connects to a standard  garden hose.
The water is delivered  (via a hose) to the saw blade.  A water tank
delivery system is optional.

 The SP1 saw is classified in the industry as a "low" powered saw.
This classification is particularly useful when selecting the proper
diamond blade for an application.

The SP1 saw is powered by a HONDA GX390 air cooled, 4-
stroke, single cylnder, OHV gasoline engine rated at 13 HP (9.6
kW) at 3,600 RPM.  Blade rotation is V-belt driven.  The upper
drive (engine) pulley on the output shaft of the engine connects
to the lower drive (spindle) pulley and thus, the blade, by three
V-Belts. As the engine shaft rotates, so does the blade. The ratio, or
difference between the engine speed and the spindle (blade) speed
is determined by the two different sizes of pulleys used.

Refer to the 

Engine Owner's Manual  for specific instructions

regarding engine operation and maintenance practices.

Operate the SP1 Saw, tools and components in accordance
with the manufacturer's instructions.  Use of any other tools for
stated operation is considered contrary to designated use.  The
risk of such use lies entirely with the user.  The manufacturer
cannot be held liable for damages as a result of misuse.

This saw is not intended for dry cutting.

■ Engine Stop Switch conveniently located on handle bar
■ Super-rigid box frame- ensures straight cuts while resisting

warping and  blade vibration

■ Rugged roller bearing wheels for long service life
■ Comfortable grip handles
■ Easy cranking for manually raising/lowering the blade to the

desired cutting height

■ Hinged front, lift-up blade guard is designed to provide easy

blade replacement

■ Saw position guide helps ensure straight cuts
■ Water system provides optimum flow and volume of water to

both sides of the blade

■ manually operated wheel clamps help to prevent unwanted

displacement of saw