GE 40350 ユーザーズマニュアル

ページ / 120
7
•  Read and follow the instructions given in the
operator’s manual.
•  Follow a regular schedule in maintaining, caring for
and using your home generator, as specified in the 
operator’s manual.
home owner responsibilities
•  Read and observe the safety rules.
•  Install only an UL approved transfer switch that is
compatible with the generator.
•  Read and follow the instructions given in this
installation and start-up manual.
installing Dealer/contractor responsibilities
Installation
This product is only for use as an optional generator system 
which provides an alternate source of electric power and 
to serve loads such as heating, refrigeration systems, and 
communication systems that, when stopped during any 
power outage, could cause discomfort or inconvenience.  
NOTICE
   This product does NOT qualify for either an 
emergency standby or legally required standby system as 
defined by NFPA 70 (NEC).
•  Emergency generator systems are intended to
automatically supply illumination, power, or both, 
to designated areas and equipment in the event of 
failure of the normal supply. Emergency systems may 
also provide power for such functions as ventilation 
where essential to maintain life, where current 
interruption of the normal supply would produce 
serious life safety or health hazards.
•  Legally Required standby generator systems are
intended to automatically supply power to selected 
loads in the event of failure of the normal source 
which could create hazards or hamper rescue or fire-
fighting operations.
Every effort has been made to ensure that information in this 
manual is accurate and current. However, we reserve the 
right to change, alter, or otherwise improve the product and 
this document at any time without prior notice.
Only current licensed electrical and plumbing professionals 
should attempt home generator system installations. 
Installations must strictly comply with all applicable codes, 
industry standards, laws and regulations.
•  Carbon monoxide detector(s) MUST be installed and
maintained indoors according to the manufacturer’s 
instructions/ recommendations.  Smoke alarms 
cannot detect carbon monoxide gas.
•  Smoke detector(s) MUST be installed and maintained
indoors according to the manufacturer’s instructions/ 
recommendations.  Carbon monoxide alarms cannot 
detect smoke.
•  Installation must strictly comply with all applicable
codes, industry standards, laws, and regulations.
•  Allow sufficient room on all sides of the generator for
maintenance and servicing.
NOT 
for 
REPRODUCTION