Poulan PP6600 ユーザーズマニュアル

KNOW YOUR GENERATOR

with all operating features and safety rules.

The grounding terminal is used to assist in properly

GROUNDING TERMINAL

grounding the generator to help protect against electrical

shock. Consult with a local electrician for grounding

requirements in your area.

Your generator has the following single phase, 60 Hz

RECEPTACLES

outlets: four 120 Volt AC, 20 Amp, and one 120 Volt/240

Volt AC, 30 Amp. The receptacles can be used for

operating appropriate appliances, electrical lighting,

tools, and motor loads.

The circuit breaker is provided to protect the generator

AC CIRCUIT BREAKER

against electrical overload and can be used to turn the

generator抯 power on or off.

The engine switch is used in combination with the recoil

ENGINE SWITCH

starter grip to start the generator. It is also used to turn

the generator off.

Remove the oil cap to check and add oil to the generator

OIL FILL CAP/DIPSTICK

when necessary.

FEATURES

RECOIL STARTER GRIP

The recoil starter grip is used (along with the engine

switch) to start the generator抯 engine.

The flow of fuel through the generator is controlled by

FUEL VALVE

the position of the fuel valve.

The air filter helps to limit the amount of dirt and dust

AIR FILTER

drawn into the unit during operation.

Use the choke lever for starting a cold engine.

When changing the engine oil, the oil drainage bolt is

CHOKE LEVER

OIL DRAINAGE BOLT

loosened to allow old engine oil to be drained.

Consult the fuel level gauge to determine the amount of

FUEL LEVEL GAUGE

fuel remaining in the generator.

The fuel tank has a capacity of 6.6 gallons.

FUEL TANK

See

Fig.