Vornado VH10 ユーザーズマニュアル
11
English
HOW TO USE
Before use, check appliance for visible damage. DO NOT USE THIS HEATER if there is evidence of damage. If any damage is found, contact
Vornado Air LLC at 1-800-234-0604.
Vornado Air LLC at 1-800-234-0604.
3. Unwrap power cord from bottom
of heater. Plug power cord into a
standard grounded wall outlet.
standard grounded wall outlet.
2. Position the heater so airflow is
not obstructed.
1. Use the integrated handle for
lifting and carrying. Located
on the back of heater.
on the back of heater.
4. Press the power button ( )
and select a Mode ( ). Next,
set thermostat to the highest
setting by turning clockwise.
When the room reaches
the desired comfort level,
turn the thermostat slowly
counterclockwise until the heat
cycles off.
set thermostat to the highest
setting by turning clockwise.
When the room reaches
the desired comfort level,
turn the thermostat slowly
counterclockwise until the heat
cycles off.
Wrap excess cord inside
the Cord Storage. Use the
notches, located inside the
Cord Storage, to secure the
power cord in place or adjust
length during use.
the Cord Storage. Use the
notches, located inside the
Cord Storage, to secure the
power cord in place or adjust
length during use.