Behringer A50-13413-00005 ユーザーズマニュアル
11
ULTRALINK UL2000M
Deactivating LOCK
1.
1.
Press the SET button. LOC ON is shown in the display.
2.
Press the
UP or
DOWN button once to select LOCOFF.
3.
Press the SET button confirm, hence deactivating the keylock function. The procedure is now over,
and the basic settings are shown in the display again.
and the basic settings are shown in the display again.
2.2.7 PRESET
The ULR2000 lets you work with 4 presets, each with 8 channels.
Factory presets (Presets 2, 3 and 4)
In the ULR2000, there are 3 factory presets (each with 8 interference-free channels). That means that all 8
channels of one preset can run simultaneously with 8 different transmitters and receivers without causing
mutual interference.
In the ULR2000, there are 3 factory presets (each with 8 interference-free channels). That means that all 8
channels of one preset can run simultaneously with 8 different transmitters and receivers without causing
mutual interference.
The channels in the 3 factory presets are all assigned to different frequencies. This way, you can always
select a frequency range that assures the best signal transmission.
select a frequency range that assures the best signal transmission.
The following table shows which frequencies are stored in the factory presets.
CHANNEL
PRESET 2
PRESET 3
PRESET 4
1
798,700 MHz
798,400 MHz
798,100 MHz
2
799,950 MHz
798,950 MHz
798,650 MHz
3
800,650 MHz
799,800 MHz
799,500 MHz
4
801,050 MHz
801,450 MHz
801,150 MHz
5
802,850 MHz
803,250 MHz
802,950 MHz
6
804,500 MHz
803,650 MHz
803,350 MHz
7
805,350 MHz
804,350 MHz
804,050 MHz
8
805,900 MHz
805,600 MHz
805,300 MHz
Tolerance 0.005%
Table 2.1: Factory preset frequencies (presets 2,3 and 4)
User preset (Preset 1)
Preset 1 is meant for the user. Frequencies of your own choice can be stored in the 8 storage slots of this
preset.
Preset 1 is meant for the user. Frequencies of your own choice can be stored in the 8 storage slots of this
preset.
If you have not stored any of your own frequencies, the frequencies stored in the user preset (Preset 1) are
identical to the frequencies stored in Preset 3.
identical to the frequencies stored in Preset 3.
Loading a preset
1.
1.
Press the SET button to get to the menu.
2.
Press the
DOWN button once to get to PRESET.
3.
Press the SET button again to get to the PRESET submenu. The display shows the currently active
preset.
preset.
4.
Press the
UP and
DOWN buttons to select the desired preset. The display shows PSET 1 (2, 3 or 4).
5.
Press the SET button to load up the preset you selected. The procedure is now over, and the basic
setting is shown in the display again.
setting is shown in the display again.
2. ULR2000 RECEIVER