Radio Shack 32-1230A ユーザーズマニュアル
2
the mics and receivers that have the features that best fit
your needs.
your needs.
This device complies with Part 90 of the
FCC Rules
. There
are a total of eight frequencies available for this
microphone. Each microphone has channels that can
operate on three of these frequencies. You must get a
license for each frequency you plan to use before you use
the microphone. Licensing eligibility depends on how you
will use the microphone. Contact your nearest FCC office to
get the necessary application.
microphone. Each microphone has channels that can
operate on three of these frequencies. You must get a
license for each frequency you plan to use before you use
the microphone. Licensing eligibility depends on how you
will use the microphone. Contact your nearest FCC office to
get the necessary application.
INSTALLING THE BATTERY
The microphone’s transmitter is powered by a single 9-volt
battery. For the longest battery life, we recommend an
alkaline battery.
battery. For the longest battery life, we recommend an
alkaline battery.
Caution: Use only fresh batteries of the required size and
recommended type.
recommended type.
1. While holding the body of the microphone, carefully
unscrew the ball grill assembly far enough to remove
the battery door.
the battery door.
2. Insert the battery into the battery compartment on top
of the ribbon, being sure the + and – terminals are
connected correctly as shown on the inside of the
battery compartment.
connected correctly as shown on the inside of the
battery compartment.