Philips AEA7100 ユーザーズマニュアル

14 EN

6 Troubleshooting

Warning

 

•

Never remove the casing of this device.

To keep the warranty valid, never try to repair 

the system yourself. 
If you encounter problems when using this 

device, check the following points before 

requesting service. If the problem remains

unsolved, go to the Philips Web page (www.

philips.com/support). When you contact Philips, 

make sure that the device is nearby and the 

model number and serial number are available.
No power to the Bluetooth

®

 speaker

 • Make sure that the AC power plug of the 

device is connected properly.

 • Make sure that there is power at the AC 

outlet.

 • As a power-saving feature, the speaker 

switches to standby mode automatically 

after staying idle for more than 15 minutes. 

Switch on the speaker again (see ‘Switch 

on the Bluetooth

®

 speaker’ on page 7).

No power to the wireless microphone

 • The batteries may be installed incorrectly 

or drained. Install or replace the batteries 

properly (see ‘Install/replace microphone 

batteries’ on page 7).

 • As a power-saving feature, the microphone 

switches to standby mode automatically 

after staying disconnected from the 

speaker for more than 15 minutes. To 

switch it on again, you need to slide the 

OFF/ON switch on the microphone to the 

OFF position and then back to the ON 

position.

No sound or poor sound

 • Adjust volume.

 • Check the Bluetooth

®

 connection.

 • Check whether you have started music 

play on the connected device.

Failed to set up connection between the 

microphone and speaker

•  Check whether both the wireless 

microphone and Bluetooth

®

 speaker 

are switched on.

•  Make sure that the wireless 

microphone and Bluetooth

®

 speaker 

are within the the effective operation 

range, that is, approximately 10 meters 

(30 feet).

•  Press and hold   on the top of the 

Bluetooth

®

 speaker for more than 10 

seconds to set up wireless connection 

manually.

Howling or echo from the wireless 

microphone

•  Adjust volume.
•  Increase the distance between the 

microphone and speaker or adjust the 

angle of the microphone towards the 

speaker.

No response from the Bluetooth

®

 speaker

 • Disconnect and reconnect the AC power 

plug, and then switch on the device again.