Astatic 220VP プリント

220VP/220VPW

Continuously-variable Pattern Condenser Boundary Microphone 

The 220VP/220VPW is an inconspicuous, continuously-variable 

polar pattern, button-style, condenser boundary microphone 

designed for surface installation. Special attention has been 

given to design the 220VP to resist interference from cell 

phones, two-way communication, and other RF devices. The 

integral 80Hz, 12dB/octave high-pass filter removes unwanted 

low-frequency energy to improve intelligibility. The all metal, 

threaded body and shock-absorbing bushings make for easy 

installation in surfaces up to 3" thick.
When mounted on a hard surface, the 220VP will take 

advantage of the “boundary effect” signal-to-noise ratio 

increase. The 220VP is terminated with a standard 3-pin  

XLRM-type connector recessed in the body of the microphone.
The 220VP features a continuously-variable polar pattern so 

it can shorten the list of products an audio system designer 

needs to consider when boundary condenser microphones 

are specified. The installer can precisely tailor the polar pattern 

for the best performance depending upon the application 

or environment. The 220VP is primarily designed for speech 

and vocal pickup in governmental, institutional, religious and 

business applications.

•  Continuously-variable polar pattern control

•  Securable polar-pattern control

•  All-metal housing suitable for commercial applications

•  Mounting hardware included

•  RF (radio frequency) Resistant Architecture

•  Integrated high-pass filter for elimination of  

  unwanted low-frequency energy

•  Shock-absorbing polymer bushings included

•  Inconspicuous design

1.  Refer to dimensional drawing for dial orientation.
2.  Adjust dial to desired polar pattern using a 1/8"  

  [3mm] flat-head precision screwdriver.
3.  Install microphone.

Installation Note:
The mounting hole should be 15/16" [24mm]  

in diameter to accommodate microphone  

and polymer bushings.