Aviom A-16II ユーザーズマニュアル

17

• The 

 button has one LED. It will light when pressed, 

indicating that the selected Channel or Group is now being 

auditioned with all other Channels being muted. Two Solo 

modes are available. 

• The 

 button has no LED in it. Pressing the M

 but-

ton with a Channel selected will cause the Channel’s lower 

(yellow) LED to light.

There is also one special button combination, the 

 button followed 

by the 

 button. When used together this combination serves a twofold 

function:

• If there is a sudden change in the audio volume coming 

through the monitor system, this button combination 

silences all audio channels instantly.

• When starting from scratch to create a mix, use this func-

tion to set all sixteen channels to zero volume and all pans to 

the center settings.

 

A-16

Save

Recall

1

2

Group

Solo

Mute

Select

Mute

3

4

5

6

7

8

9

10

11

12

13

14

15

16

Note: The text on the right side of the Personal Mixer label reads “In 

Recall Mode All Volumes Zero

” as a reminder that this function is 

always available. 

When the system is powered up, Preset 1 is automatically selected. On the 

Personal Mixer, one Channel is always selected for editing. You can tell that 

a Channel is selected because the upper LED in its button is lit.

The sixteen Channel buttons have two LEDs in each, an upper and a lower. 

The red upper LED indicates that the Channel is selected; you can change 

its volume and panning. You can also solo or mute the channel using the 

dedicated 

 and M

 buttons on the Personal Mixer surface. 

The upper LEDs will also light in combination if a track is linked or is part 

of one of the three available Groups. (More info on Groups appears later in 

this document.)