Aviom A-16II ユーザーズマニュアル

21

LEDs in the Volume section of the mixer surface will indicate the level in 

real time. There are twelve LEDs in the Volume indicator, each capable of 

displaying two levels, for a total of twenty-four visible lighted steps.

When a Channel is selected, the current volume is instantly indicated on the 

LEDs. When no LEDs are lit, Channel volume is at its minimum setting. 

A-16

Save

Recall

1

2

Group

Solo

Mute

Select

Mute

3

4

5

6

7

8

9

10

11

12

13

14

15

16

To make changes to a Channel:

• Select a Channel by pressing its numbered button—the 

button’s upper LED will light.

• Rotate the 

 knob to the right to increase the volume, 

to the left to lower the volume

• While the Channel is still selected, you can also change the 

Pan setting. Rotate the 

 knob left or right to change the 

position of the Channel in the stereo field.

The Pan indicator is made up of five LEDs. The center LED is green. The 

LEDs on either side of center are red. As you turn the 

 knob, the LEDs 

will light in various combinations to provide the maximum number of 

position indicators with the fewest number of lamps. At either end of the 

display only one LED will be lit to indicate that the Channel is panned full 

left or right.

When using linked channels (stereo inputs), the LEDs light in different 

patterns, using a pair of LEDs on either side of the display to indicate the 

width of the stereo field. When the stereo image has been collapsed to 

mono, only the center green LED will be lit. In this case the stereo input 

will be heard as mono.

Start creating a monitor mix by selecting the first Channel you want to 

hear.